santb1975
02-14 11:30 PM
^^^
wallpaper BMW 328i Coupe Short Term Car
dc4opera
05-19 01:07 PM
One more thing, never disclose anything with company's attorney, they will be loyal to your employer and not you. Look for soem other attorney.
A few more questions:
1. While the I-140 is pending, can I get a different lawyer to file the I-485?
2. If I wait until the I-140 is approved and then get a different lawyer to process my I-485 (or do it myself), will this be a problem?
3. Can my employer withdraw the I-140 AFTER it's been approved?
Please advise me.
A few more questions:
1. While the I-140 is pending, can I get a different lawyer to file the I-485?
2. If I wait until the I-140 is approved and then get a different lawyer to process my I-485 (or do it myself), will this be a problem?
3. Can my employer withdraw the I-140 AFTER it's been approved?
Please advise me.
LostInGCProcess
09-04 01:56 PM
Also, if i-140 is revoked , that should trigger NOID or RFE which the lawyer will handle (hopefully successfully).
GCCovet
Remember, the NOID/RFE goes to your Attorney if you have submitted G-28 form. If not, it comes to you.
GCCovet
Remember, the NOID/RFE goes to your Attorney if you have submitted G-28 form. If not, it comes to you.
2011 Used BMW 328 2008 for sale
mdy_tvr
02-04 06:34 PM
yes, since she has a pending 485 she does not have to worry about status, that pending 485 keeps the status around. She can even file for an EAD.
Thanks meridiani.planum for the response.
Thanks meridiani.planum for the response.
more...
snathan
05-19 03:13 PM
Hello fellas...i had quit WIPRO @ USA giving 2 weeks notice on 2009.WIPRO Mangers tried to withdraw my resignation in all means.They even told that they ll sue me for breaking the contract that i have signed.
After this WIPRO bangalore office sent me 5 letters asking me to pay 6 lac rs indian money to them.I refused and didnt respond to it .
As general rule who ever resign the company should provide insurance for next 30 days as a coverage .I guess they didnt do that for me .
Also they didnt send me the relieving letter and others indian PF etc.
They even paid less that that was specified in the LCA.
I would like to know if you had complaint DOL on this ?
Regards
You should have reported these issues within 12 months of your employement. Otherwise there is no use. All you can do is send a letter to the Wipro HR, stateing you are filing a formal complaint to the DOL and wirting to the congress man. Also tell them you are going to make sure this story highted everywhere in the Internet and media to damage WIPRO's name. I am sure they do not want to get a bad PR in this situation where everyone hates the Indian companies.
After this WIPRO bangalore office sent me 5 letters asking me to pay 6 lac rs indian money to them.I refused and didnt respond to it .
As general rule who ever resign the company should provide insurance for next 30 days as a coverage .I guess they didnt do that for me .
Also they didnt send me the relieving letter and others indian PF etc.
They even paid less that that was specified in the LCA.
I would like to know if you had complaint DOL on this ?
Regards
You should have reported these issues within 12 months of your employement. Otherwise there is no use. All you can do is send a letter to the Wipro HR, stateing you are filing a formal complaint to the DOL and wirting to the congress man. Also tell them you are going to make sure this story highted everywhere in the Internet and media to damage WIPRO's name. I am sure they do not want to get a bad PR in this situation where everyone hates the Indian companies.
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
more...
abhatti
07-16 02:56 PM
where do you all see/consult for updates or news on USCIS activities?
2010 Used BMW 328 2008 for sale
dealsnet
02-20 08:21 AM
If you filed I-485 for your son, no need to file H-4. HE can use AP to go abroad. He is in AOS status. Not out of status. You can keep H1, if you want. Not the case for dependants.
Once file I-485, you are fine.
I am starting my 10th year on H1 Visa, and thus my company has renewed a few times already. On one of those instances, through ignorance I suppose, my H1 was renewed but my dependents were not. There was an assumption, which I now understand to be wrong, that my renewal would cover my dependents as well. Since after that we have renewed for all of us successfully.
One of the dependents, the wife, traveled out of the country and re entered with a H4 Stamp, which I understand cures her status. My son, however has never done this. We all have I-485's pending and I am worried about what that means for him. I am thinking of travelling out of the country, like Canada, to get our visas stamped and re - enter on the H status.
Question is: Is there any risk in that? If we go to, say Toronto to get the visa renewal, is there any chance that they would deny him? We have the 797 approvals for all of us. The last thing I want is to get stuck outside the country. I have reason to believe we have been pre adjudicated, if this means anything, and it is possible that if I do nothing it would all work out. However, I do not want to take chances with my kid's future.
Any one have any insight? Would going to Canada and returning on H4 cure his status? And are there any risks to this strategy? Thanks for the insight.
Once file I-485, you are fine.
I am starting my 10th year on H1 Visa, and thus my company has renewed a few times already. On one of those instances, through ignorance I suppose, my H1 was renewed but my dependents were not. There was an assumption, which I now understand to be wrong, that my renewal would cover my dependents as well. Since after that we have renewed for all of us successfully.
One of the dependents, the wife, traveled out of the country and re entered with a H4 Stamp, which I understand cures her status. My son, however has never done this. We all have I-485's pending and I am worried about what that means for him. I am thinking of travelling out of the country, like Canada, to get our visas stamped and re - enter on the H status.
Question is: Is there any risk in that? If we go to, say Toronto to get the visa renewal, is there any chance that they would deny him? We have the 797 approvals for all of us. The last thing I want is to get stuck outside the country. I have reason to believe we have been pre adjudicated, if this means anything, and it is possible that if I do nothing it would all work out. However, I do not want to take chances with my kid's future.
Any one have any insight? Would going to Canada and returning on H4 cure his status? And are there any risks to this strategy? Thanks for the insight.
more...
vallabhu
01-02 11:56 AM
Is it BA with Mathematics (honors) or BSC. in Mathematics (honors). or does it say General?
If you are asking about Labor petition It said Mathematics or related feild
if you are my qualification it is BSc with Mathematics. but my trascripts say maths1,maths2, maths3, maths4 as supposed to Mathematics1,Mathematics2,Mathematics3,Mathematics 4.
which made the difference.
but provisional said Mathematics, so adjudicator got confused.
If you are asking about Labor petition It said Mathematics or related feild
if you are my qualification it is BSc with Mathematics. but my trascripts say maths1,maths2, maths3, maths4 as supposed to Mathematics1,Mathematics2,Mathematics3,Mathematics 4.
which made the difference.
but provisional said Mathematics, so adjudicator got confused.
hair Used BMW 328 2009 for sale
my2cents
08-04 03:53 PM
Not True
All dual intention like H1b/H4 are treated differently. For those AOS applicants where they also have H1b/H4 status ( Not necessarily VISA stamped) ..they need to be here when filed and if they leave after filing then neither I-485 or I-131 will get cancelled.
After approval, you can mail them.
I have known 2 person whose spouses came without problem.
Now , If you are F1 or B1 pure non immigrant VISA and you leave without it being approved then you are in problem.
All dual intention like H1b/H4 are treated differently. For those AOS applicants where they also have H1b/H4 status ( Not necessarily VISA stamped) ..they need to be here when filed and if they leave after filing then neither I-485 or I-131 will get cancelled.
After approval, you can mail them.
I have known 2 person whose spouses came without problem.
Now , If you are F1 or B1 pure non immigrant VISA and you leave without it being approved then you are in problem.
more...
glus
10-09 01:07 PM
I came to the USA on 3rd November, 2006 in company A. I did not work a single day in company A. I joined to company B on 17th January, 2007. I have no idea how my employer filed my H1B in company B without any paystub. I joined to company C on 24th July as they started my GC process right away. My H1B with company B and C are still pending. Company C has filed my labor on 31st August and got approval on 11th September. I am planning to file I-140, I-485, I-765 and I-131 together. So my questions are:
1) Is there any possibility to get denied/RFE for my GC as my last two H1B are still pending ?
2) What are the risks to be considered if I go back to my country and come back on AP as I don't have a visa stamp on my passport ? I am from a non-retrogressed country.
3) I heard that it takes too much time to bring spouse here if I marry after GC approval. I am planning to go back and marry and come back but don't want to bring my future wife on H4. Will it help me later to avoid unnecessesary waiting time to bring her here once my GC is approved ?
I shall be thankful to you to get my answer.
Thanks & regards,
SU1979
This is a complicated situation. Technically you are in "authorized status" stay because your H1 transfer is pending. I don't know what happens if and when USCIS realizes you never worked for company A. I assume, they will grant your H1 transfer but will not extend your period of stay in H1 and you would need to re-enter on a vailid H1. I would suggest contacting a good lawyer regarding this quickly. Once you are out-of-status for 181days you should not file I485 as it would not be approvable.
As for the second question; if you manage to receive AP and at the time you re-enter the US your I485 is pending, normally you will be able to re-enter without any visas in your passport.
Third question; yes, If you get married after you get GC, it will take much longer; about 4 years at this time, for her to get a GC. If you marry her before your I485 is approved, you can attach her to your GC and she will receive GC at the same time (approximately) as you do assuming all other conditions are met.
Speak to attorney regarding item 1 as soon as possible or do H1 premium to see what happens.
1) Is there any possibility to get denied/RFE for my GC as my last two H1B are still pending ?
2) What are the risks to be considered if I go back to my country and come back on AP as I don't have a visa stamp on my passport ? I am from a non-retrogressed country.
3) I heard that it takes too much time to bring spouse here if I marry after GC approval. I am planning to go back and marry and come back but don't want to bring my future wife on H4. Will it help me later to avoid unnecessesary waiting time to bring her here once my GC is approved ?
I shall be thankful to you to get my answer.
Thanks & regards,
SU1979
This is a complicated situation. Technically you are in "authorized status" stay because your H1 transfer is pending. I don't know what happens if and when USCIS realizes you never worked for company A. I assume, they will grant your H1 transfer but will not extend your period of stay in H1 and you would need to re-enter on a vailid H1. I would suggest contacting a good lawyer regarding this quickly. Once you are out-of-status for 181days you should not file I485 as it would not be approvable.
As for the second question; if you manage to receive AP and at the time you re-enter the US your I485 is pending, normally you will be able to re-enter without any visas in your passport.
Third question; yes, If you get married after you get GC, it will take much longer; about 4 years at this time, for her to get a GC. If you marry her before your I485 is approved, you can attach her to your GC and she will receive GC at the same time (approximately) as you do assuming all other conditions are met.
Speak to attorney regarding item 1 as soon as possible or do H1 premium to see what happens.
hot Used BMW 328 2007 for sale
gee_see
10-19 11:04 AM
Could you point out some sites where salary issue is mentioned (impact of decrease in salary for AC21)?
more...
house 2008 BMW 3-Series 328I Sedan
miguy
03-16 08:43 AM
hopein07........do you know if one has to pass the evaluating exam first to get a Statement of Need from Canada for j1?...
tattoo Used 2008 BMW 3 Series for
mishras
05-14 10:49 AM
This is not a joke, we have received this querry, and are seeking some helpful advice.
more...
pictures 1999 Bmw 328I and Florida
eyeopeners05@yahoo.com
06-02 12:55 PM
July 07 485 filer with pd of July 2003 in EB3.
EAD and AP available and can be used for AC21.
Current H1 valid till 2010 July
Got married after filing 485 and so wife does not have EAD etc and is on H4.
Another company wants me to come to their company using EAD as they dont want to file h1. Can I use EAD under AC21 and switch jobs while my wife is still on H4 ?
Is the EAD/AOS status change applicable only when going in and out of the country ? If we decide to stay in the USA till we get a GC, does it matter if I use EAD to change jobs though my wife is on H4 ?
EAD and AP available and can be used for AC21.
Current H1 valid till 2010 July
Got married after filing 485 and so wife does not have EAD etc and is on H4.
Another company wants me to come to their company using EAD as they dont want to file h1. Can I use EAD under AC21 and switch jobs while my wife is still on H4 ?
Is the EAD/AOS status change applicable only when going in and out of the country ? If we decide to stay in the USA till we get a GC, does it matter if I use EAD to change jobs though my wife is on H4 ?
dresses USED 2011 BMW 328 in TAMPA / ST PETE, FLORIDA
kicca
01-31 05:29 PM
^^^
more...
makeup 2008 BMW 3-Series 328I Sedan
calboy78
01-12 01:04 PM
Why take chances ? Be safer than being sorry later.
Take some leave (paid or unpaid) - get it stamped over there + meet your loved ones. You'll have a peace of mind at the cost of couple thousand dollars.
"my" suggestion.
Take some leave (paid or unpaid) - get it stamped over there + meet your loved ones. You'll have a peace of mind at the cost of couple thousand dollars.
"my" suggestion.
girlfriend USED 2011 BMW 328 in TAMPA / ST PETE, FLORIDA
arihant
06-22 01:17 PM
Maybe he should volunteer for a pay cut of 30%. ONLY 30%. See, its trivial little teeny weeny 30%. Its nothing. You wont even feel it. How about that director?
I like your Logic. :D
I like your Logic. :D
hairstyles USED 2011 BMW 328 in TAMPA / ST PETE, FLORIDA
shirish
04-27 12:05 PM
I think even if the EB2 I-140 is already approved, you still could port the PD, but most important thing is you need your EB3 I-140 approved for porting the PD. Please talk to a good lawyer.
Might be an issue as the EB2 I-140 is already approved. Talk to a good lawyer and see what is the best course of action.
Although it is late now, you should have withdrawn the original LC and refiled in PERM with same PD. That way you would have maintained the original priority date for EB2. Your lawyer must have told you that when you refiled your LC.
Might be an issue as the EB2 I-140 is already approved. Talk to a good lawyer and see what is the best course of action.
Although it is late now, you should have withdrawn the original LC and refiled in PERM with same PD. That way you would have maintained the original priority date for EB2. Your lawyer must have told you that when you refiled your LC.
snathan
05-19 03:06 PM
I believe that @GCFrenzy your suggestions are good. For any business visa it is definitely a basic requirement to have a letter stating all the information that you are mentioning. I had also worked for a large Indian company and my first visit to US was on B1 this was immediately after 9/11 and the client gave a very similar letter in those days however you did not go to the consulate for stamping. Also if the company can state the duration of the trip and substantiate with a return ticket the chances of approval will be much higher the duration should be less than 5-6 weeks. Issuing visa is always in good faith and at the discretion of the VO. @Nathan I think it would not be correct to generalize even though what you are saying is correct because many genuine people are affected due to the collateral a damage. Think of this many people when they applied for F1 also stated in good faith that they will return to their home countries after their studies but most of them are still here and many of them on immigration forums :).
I am not aginst the OP or generalizing the B1 abuse. I am stating my opinion of what could be the reason behind the denial. You know, now a days even people are getting 221g for the H4 stamping. It does not matter what visa you are going for, the US consulates just looking for a execuse to reject. Not only in India, there are lot of people getting 221g in Canada, and got stuck up there.
I am not aginst the OP or generalizing the B1 abuse. I am stating my opinion of what could be the reason behind the denial. You know, now a days even people are getting 221g for the H4 stamping. It does not matter what visa you are going for, the US consulates just looking for a execuse to reject. Not only in India, there are lot of people getting 221g in Canada, and got stuck up there.
sandy_anand
11-09 03:27 PM
Filled out the form...
No comments:
Post a Comment